Question from our customer: I have one of ENALY ozx-300at ozone generators. I would like to know
how to use it for an ozone enema. What settings should I use for clean water in my existing enema kit.
Below are the information for you to use our Ozx-300at to ozone enema:
Using an ozone generator like the OZX-300AT for an ozone enema is
something that should be approached with caution, as ozone is a
powerful oxidant. While ozone therapy has been used in alternative
medicine, it is important to follow safety guidelines to avoid
potential harm, especially when applied internally.Here’s a general guide on how ozone therapy might be used in the
context of an enema, but please consult a healthcare professional who
is knowledgeable in ozone therapy to ensure you’re doing this safely
and appropriately for your specific needs.Steps for Using an Ozone Generator for an Enema:
- Enema Kit Preparation:• You’ll need a standard enema kit, which typically includes a
bag, tubing, and a nozzle.• Ensure the enema kit is clean and sterilized before use to avoid
any risk of infection.- Ozone Generation:• The OZX-300AT ozone generator is designed to produce ozone by
running oxygen through a corona discharge, which creates ozone gas.• You will need a small silicone or rubber tubing to attach to the
output of the ozone generator. You can use the tubing from your
existing enema kit or purchase a dedicated ozone-resistant one, as
ozone can degrade regular plastic tubing.- Infusing Ozone into Water:• Fill the enema bag with clean, filtered water. The water should
be at room temperature or slightly warm for comfort.• Attach the ozone tubing to the water container’s intake or the
nozzle’s connection, ensuring it is airtight.• Turn on the ozone generator and set it to low or medium output,
depending on the level of ozone concentration. Ozone is potent, so
start with a lower setting to gauge how your body reacts.• Run the ozone through the water for about 5 to 10 minutes to
dissolve the ozone into the water. This allows the water to become
ozonated and ready for use.- Enema Administration:• Once the water has been ozonated, you can administer it as you
would any other enema.• Lay down in a comfortable position, and insert the enema nozzle.
Ensure the water is slowly and comfortably infused into your colon.• Retain the water for a brief period (a few minutes), and then
expel it.- Settings for Ozone Levels:• Most users begin with a very low ozone concentration to minimize
risk. Typically, 1-3 milligrams per liter (mg/L) of ozone is
recommended for internal use like an enema. Using higher
concentrations could irritate the digestive tract, so it’s important
to be cautious and start small.• Avoid long durations of ozone exposure (generally no more than
10-15 minutes), and start with small amounts of water (around 1-2
liters) to minimize the risk.Safety Notes:
• Ozone can be harmful if inhaled or absorbed in excessive amounts,
so it’s critical to ensure that the ozone is completely dissolved
into the water before use and not breathed in directly.• Always consult a healthcare professional before attempting ozone
therapy, especially for internal use.• You may want to start by testing ozone therapy with external
applications or topical treatments (such as ozone foot baths) to
understand your tolerance.• Ensure that you are using ozone-resistant equipment, as ozone can
degrade regular plastics or rubber.We highly recommend reaching out to a professional who specializes in
ozone therapy for further guidance.
